Grillo Climber 10.27 AWD

4WD Performance, High Output Commercial engine, Unmatched Operator Comfort
Safety and Comfort
Its low center of gravity enables the Grillo Climber to handle steep and undulating terrain safely and competently. The driver is positioned directly over the cutting deck and sits low in the seat as you would driving any other vehicle.  Other machines covered by this class of hill mower do not provide anywhere near the same level of operator comfort. Why would you want to drive a machine with your knees up around your ears! 

The driver’s feet are positioned naturally in several positions so the design of the Climber is quite different to other mowers. The results of this give more stability, control and safety for the operator. This is a safe machine for Contractors or Professionals who need to mow in steep environments for long periods.

Increased Traction and Agility
The Climber 10.27 is an All Wheel Drive (AWD) machine but provides maximum maneuverability. Its small turning circle of only 70cm is best in its class. It also features differential lock which provides superior traction, allowing the user to manage any tricky areas by depressing the diff lock pedal to engage both rear wheels simultaneously.

• Extremely low center of gravity
• Balanced weight distribution to provide maximum stability
• High wheel grip and Differential Lock where traction is required on steep slopes
• Low engine noise
• Hydrostatic transmission
• A large 13 litre fuel tank to enhance productivity
• Foldable roll bar fitted
• Ergonomically designed Grammer suspension seat with arm rests and seat belt
• Tow bar and twin LED headlights fitted as standard
• Will safely go places a tractor can’t go

Specifications


Engine: Briggs & Stratton Series 8270 Commercial 
Start: Electric, with 12 V battery
Supply fuel: Petrol
Displacement 724 cc, 2 Cylinders
Power 27 HP (Gross)
Air cooled 
Dry air filter with interchangeable filter cartridges
Fuel tank capacity: 13 L

Gearbox:4-wheel-drive hydrostatic transmission.
Clutch: Electromagnetic clutch with P.T.O and blade brake.
Cutter deck: Side and rear discharge
Cutting configuration: 1 rotating blade with floating blades made of special heat treated steel

Cutting width: 980 mm (38")
Cutting height: From 35 mm to 135 mm with continuous adjustment (not stepped)
Peripheral blade speed: 87 m/sec

 Differential locking: On the rear axle, with pedal engagement
Front tyres: 16x6.50-8 tractor. With anti-puncture treatment
Rear tyres: 20×10.00-8 TRACTOR
Speed: Continuously variable from 0 to 9 km/h + reverse speed from 0 to 8 km/h
Inner turning radius: 70 cm
Oscillating front axle

Seat: Grammer seat with weight-adjustable suspension, seatbelt, equipped with foldable roll-bar
Parking brake: On the rear wheels with lever engagement.
Mowing capacity per hour: (indicative) 7500 m2/hr
Standard features: Tow bar and front Twin LED headlight

 Length 2060 mm
Width 1080 mm
Height 1185 mm
Distance between axles: 1420 mm
Weight 355 kg